1544-3566
工程技術
Quarterly
No
ACM T ARCHIT CODE OP
0
55
UNITED STATES
http://dl.acm.org/citation.cfm?id=J924
較慢,6-12周審稿時間
容易平均錄用比例
1.166影響因子
計算機:硬件小學科
月期刊平臺服務過的文章錄用時間為1-3個月,依據20年經驗,經月期刊專家預審?fù)ㄟ^后的文章,投稿通過率100%以上!
從提交到第一次響應的平均周轉時間為47天,最多2個月。對于修訂的手稿,審查過程會更快。許多被接受的手稿經過兩輪審查,在提交后僅5個月就做出最終決定。接受的手稿在接受后立即在數字圖書館出版。它們將在下一期ACM玉米卷上印刷,這意味著最多會有3個月的額外延遲。因此,優秀的手稿可以在6個月內完成從提交到印刷;需要大幅度修改的文件將在最多9個月內完成印刷。兩次審查后的ACM TACO接受率在30%左右。ACM TACO具有與最佳ACM會議相競爭的審查周期和接受率,但不存在不方便的不可協商的提交截止日期,其優點是能夠根據精心挑選的審查人員的詳細審查報告修改論文,并在其被接受后立即發布。除此之外,原始工作論文的作者還受到公開邀請,在每年舉行的HIPEAC會議上發表論文,該會議是歐洲首屈一指的關于ACM-TACO中心議題的網絡活動,有600多名科學家參加。沒有義務在ACM TACO上發表論文。
The average turnaround time from submission to first response is 47 days, and at most 2 months. For revised manuscripts, the review process goes even faster. Many accepted manuscripts go through two rounds of review to reach a final decision only 5 months after submission. Accepted manuscripts are published in the digital library immediately after acceptance. They are printed in the next ACM TACO issue, which means an extra delay of at most 3 months. Hence, excellent manuscripts can make it from submission to print in 6 months; papers needing a major revision will make it to print in at most 9 months. The ACM TACO acceptance rate after two review rounds varies around 30%.ACM TACO has a review cycle and an acceptance rate which is competitive with the best ACM conferences, but without the inconvenient non-negotiable submission deadlines, and with the advantage of being able to revise a paper based on the detailed review reports by carefully selected reviewers, and of being published as soon as it is accepted. On top of that, authors of original work papers get an open invitation to present their paper at the yearly HiPEAC conference, which is the premier European network event on topics central to ACM TACO, attended by more than 600 scientists. There is no obligation to present the paper in order to have the paper published in ACM TACO.
快速預審、投刊前指導、專業學術評審,對文章進行評價;
立即咨詢校對編輯、深度潤色,讓稿件符合學術規范,格式體例等標準;
立即咨詢適用于語句和結構尚需完善和調整的中文文章,確保稿件達到要求;
立即咨詢數據庫包括:期刊、文章、書籍、會議、預印書、百科全書和摘要等;
立即咨詢讓作者在期刊選擇時避免走彎路,縮短稿件被接收的周期;
立即咨詢根據目標期刊格式要求對作者文章進行全面的格式修改和調整;
立即咨詢幫助作者將稿件提交至目標期刊投稿系統,降低退稿或拒稿率;
立即咨詢按照您提供的稿件內容,指導完成投稿附信(cover letter);
立即咨詢大類學科同領域優質期刊 | 大類學科 | 小類學科 | 影響因子 | 分區 | ISSN |
---|---|---|---|---|---|
ACM TRANSACTIONS ON DESIGN AUTOMATION OF ELECTRONIC SYSTEMS | 工程技術 | 計算機:硬件 | 0.942 | N/A | 1084-4309 |
ACM Transactions on Embedded Computing Systems | 工程技術 | 計算機:硬件 | 1.368 | N/A | 1539-9087 |
Advances in Computers | 工程技術 | 計算機:硬件 | 1.135 | N/A | 0065-2458 |
ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING | 工程技術 | 計算機:硬件 | 0.823 | N/A | 0925-1030 |
CANADIAN JOURNAL OF ELECTRICAL AND COMPUTER ENGINEERING-REVUE CANADIENNE DE GENIE ELECTRIQUE ET INFO | 工程技術 | 計算機:硬件 | N/A | N/A | 0840-8688 |
COMMUNICATIONS OF THE ACM | 工程技術 | 計算機:硬件 | 5.41 | 2區 | 0001-0782 |
COMPUTER | 工程技術 | 計算機:硬件 | 3.564 | 3區 | 0018-9162 |
COMPUTER JOURNAL | 工程技術 | 計算機:硬件 | 0.98 | 4區 | 0010-4620 |
Computer Networks | 工程技術 | 計算機:硬件 | 3.03 | 3區 | 1389-1286 |
COMPUTER STANDARDS & INTERFACES | 工程技術 | 計算機:硬件 | 2.441 | N/A | 0920-5489 |
發現心儀選題請?zhí)顔?/b>
獲取發表周期短、審稿速度快容易錄用的期刊